Qualcomm OBDII J1708 Guía para resolver problemas Pagina 33
- Pagina / 110
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
80-JB566-1 Rev. C 9-3
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
System Verification Performing System Verification
CDD and Ignition On should have a green checkmark.
If the results of the Run All Tests are acceptable, send a message from the unit and verify the
message is received by dispatch. Once that is confirmed, have dispatch send a message and
confirm the message is received. If installation is done after hours, call Customer Support to
verify the message is sent and received. Once this is done, System Verification is
complete.
CDD Database Sync Will show a green checkmark when database has been
synchronized with NOC (usually takes 5 to 10 minutes after
unit is first powered up). See Chapter 16: CDD Database
Sync Problem if red X.
Ignition On Will show a green checkmark if the ignition is ON. See
Chapter 20: Ignition On Detection Problem if red X.
J1939 Packet Detection Will show a green checkmark if connected to the J1939
databus, the vehicle’s ignition is ON, configured to look for
J1939, and its getting data. All vehicles do not have J1939.
See Chapter 19: J1939 Packet Detection Problem if red X.
J1587 Packet Detection Will show a green checkmark if connected to the J1587
databus, the vehicle’s ignition is ON, configured to look for
J1587, and its getting data. All vehicles do not have J1587.
See Chapter 18: J1587 Packet Detection Problem if red X.
Use scroll bar to see
all results.
Second page of tests
- Installation and 1
- Troubleshooting 1
- QUALCOMM Incorporated 2
- 5775 Morehouse Drive 2
- San Diego, CA 92121-1714 2
- Installation Contents 3
- iv 80-JB566-1 Rev. C 4
- Important Safety Information 5
- Component Overview 7
- Display Holster 8
- RAM Mount 8
- Backing Plate 8
- Activation 9
- Online Activation Activation 10
- 2-2 80-JB566-1 Rev. C 10
- 80-JB566-1 Rev. C 2-3 11
- Activation Online Activation 11
- Application Management 12
- 80-JB566-1 Rev. C 2-5 13
- 2-6 80-JB566-1 Rev. C 14
- Installation Planning 15
- Installing the VTM50 17
- Securing the VTM50 18
- Using Self-Drilling Screws 18
- Antenna Installation 19
- Installing Antenna 20
- Selecting a Mounting Location 21
- Installing the Display 22
- Power/IO Cable Connection 25
- Extending MCP50 Ignition Wire 26
- Optional Accessories 27
- PTO Installation 28
- System Verification 31
- 9-4 80-JB566-1 Rev. C 34
- Troubleshooting Contents 35
- 80-JB566-1 Rev. C 36
- Troubleshooting Guidelines 37
- Replace Only Faulty Parts 38
- 08AAA_05 40
- 80-JB566-1 Rev. C 11-3 41
- (-) lead on Pin A 41
- (+) lead on Pin B 41
- 11-4 80-JB566-1 Rev. C 42
- DIU Problems 43
- Cannot Send Messages 45
- 13-2 80-JB566-1 Rev. C 46
- Cellular End to End Problems 47
- 14-2 80-JB566-1 Rev. C 48
- CDD Database Sync Problem 51
- 16-2 80-JB566-1 Rev. C 52
- GPS Fix Problem 53
- 18-2 80-JB566-1 Rev. C 56
- 19-2 80-JB566-1 Rev. C 58
- Ignition On Detection Problem 59
- 20-2 80-JB566-1 Rev. C 60
- Core Data Problem 61
- VTM LED Indicator 63
- 22-2 80-JB566-1 Rev. C 64
- Acquiring Network Problem 65
- System Overview 67
- Normal Performance 67
- - - - - - - - - - 69
- 24-4 80-JB566-1 Rev. C 70
- Overview 71
- Abnormal Performance 71
- Event Not Triggered 72
- 80-JB566-1 Rev. C 25-3 73
- Events Triggered in Error 74
- 80-JB566-1 Rev. C 26-1 75
- 26-2 80-JB566-1 Rev. C 76
- Appendix Contents 77
- Wiring Diagrams and Charts 79
- 6-Pin Power/IO Cable 80
- 9-Pin Power/IO Cable 80
- 08AAA_051 83
- A-6 80-JB566-1 Rev. C 84
- B-2 80-JB566-1 Rev. C 86
- 1/4" 88
- 03AAA_270a 88
- Butt Splicing 89
- 03AAA_90b 90
- Crimp tooth 90
- Do NOT crimp wire here 90
- Crimp here 90
- Crimping Tool 91
- Ring Terminals 92
- Proper Grounding 93
- Routing and Protecting Cables 94
- Standard RMA Procedure 95
- D-2 80-JB566-1 Rev. C 96
- Before You Start 97
- E-6 80-JB566-1 Rev. C 102
- Inspecting the Antenna 104
- Component Information 105
- 45-JB593-1 107
- 80-JB566-1 Rev. C G-3 107
- Paccar adapter 107
- G-4 80-JB566-1 Rev. C 108
- Installation Form 109
- H-2 80-JB566-1 Rev. C 110
© 2020, manymanuals.es. Todos los derechos reservados | 0.031 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales